•
1 8

My Store

The Circle tool - The perfect circle making tool

The Circle tool - The perfect circle making tool

$45.00 USD
$45.00 USD
Sale Sold out
Shipping calculated at checkout.

The Circle jerk tool allows for you to create the perfect circle on a number of surfaces including vertical and horizontal walls. Just by attaching some double sided tape for the appropriate surface, you are able to create a stable and reliable center point to build your design from.

Just run the any string into the top holes and then into the string slot. snap the clips together and them you are able to put any standard size pencil, marker, chalk into the center hole and make your perfect circle.

KIT INCLUDES:

  1. The Circle Jerk spinner

  2. Clip Attachment

  3. 5 foot string

  4. Standard Chalk attachment

  5. Street Chalk attachment

  6. 2X 3M Dual Lock velcro tape squares

  7. Spray paint can attachment

 

NOTE:

  • The Perfect Circle maker set is made with 3D printing and hand-assembled so small imperfections my show. This does not affect the performance of the tool.

  • Colors of the items may vary from the colors of the items pictured above. colors are decided based on the availability of the specific raw materials used.

  • This material can handle light exposure to acetone but Do not soak in acetone for more that 10 minutes. It can be cleaned with acetone and a wire brush 
View full details

Using the Pen Attachment

  • Step 1

    Bring the string to the top of the pen attachment.

  • Step 2

    Wrap string around the top slit and bring the string to the front.

  • Step 3

    Take the string and slide through the second slit and pull the string to the back beside the hole.

  • Step 4

    Pull tight and adjust by repeating steps 1-3. Now you can use a marker or pencil in the hole to make the circle markings.

Using the Can Attachment

  • Step 1

    Slide the sting through the top hole opening. The distance between the hole and the circle maker will be the diameter of the circle.

  • Step 2

    Slide the string you just slid through the first hole into the second hole on the left side of the can attachment. Pull about 5 inches through.

  • Step 3

    Wrap the remaining string around the hook on the left side. This will prevent the string from giving when pulling on the can to make your circle.

  • Step 4

    Attach the can attachment to the aerosol can. To adjust the length of the string, take the can attachment off and repeat steps 1-3 to your desired length.

What size is best for you?

The Perfect Cirle Maker tool comes in two different sizes.

Circlele Maker: 60mm (2.36 (inches)

Circle Maker Mini: (1.57 inches)

Each maker performance the exact same. the difference is the surface area for attaching a secure double-sided tape or velcro. The larger the surface are the more secure. the circle maker will be. The mini is great for travel and small to medium size projects because of mobility but they are both interchangeably, based on you preference.